Journal
Notes on relighting.
Retrofit guides, sustainability insight and practical advice from The Light Engineers.
Latest guides

Buying · 6 min
Budget 2026: capital allowances and LED retrofit
The LIA says the First Year Allowance rises from 40% to 50% in January 2027. What Budget 2026 could mean for planning an LED retrofit.

Compliance · 6 min
ESOS Phase 4: how lighting retrofit can help
ESOS progress updates are due by 5 December 2026 and Phase 4 is under way. Where lighting retrofit fits into ESOS audits and action plans.

Sustainability · 6 min
Repair or replace? New research on LED systems
New Oxford University research finds most buildings in its sample saved money by repairing and reusing LED systems instead of replacing them.

Sustainability · 5 min
Remanufactured luminaires: what building owners should know
What luminaire remanufacturing involves, the BS 8887-221 code of practice, warranties, and how it compares with replacing fittings, after Recolight Revive.

Regulations · 5 min
EPC B by 2031: lighting retrofit for larger rented offices
Government plans EPC B by 2031 for rented commercial buildings over 1,000 m². What it means for landlords and where a lighting retrofit fits.

Sustainability · 5 min
TM66 circularity scoring and lighting retrofit
TM66 scores how circular a luminaire is. Here is how a retrofit that keeps the housing and replaces the gear can be assessed and evidenced.

Process · 6 min
Is your luminaire housing worth keeping?
A checklist for deciding whether existing light fittings can be retrofitted to LED or should be replaced, with lessons from a council office upgrade.

Guide · 5 min
What is an LED lighting retrofit?
An LED lighting retrofit keeps the existing luminaire body and replaces the internal parts, swapping the old ballast and lamps for a new LED engine and high-efficiency driver.

Guide · 6 min
Retrofit vs replace: which is right for your lighting?
Retrofit suits sound luminaires, tight budgets, protected ceilings and sustainability goals, while replacement suits fittings that are damaged, obsolete or no longer right for the space.

Guide · 6 min
Replacing fluorescent lighting with LED
Fluorescent lighting can be upgraded to LED by retrofitting existing fittings with new LED engines and drivers, or by replacing them; retrofit keeps bodies and cuts waste.

Compliance · 5 min
The fluorescent lamp phase-out: what UK buildings need to know
Restrictions on many fluorescent lamps mean UK building owners should plan an LED upgrade, and retrofitting existing fittings is often the fastest, lowest-waste route.

Process · 5 min
How the reLUMEN8 retrofit process works
reLUMEN8 works in four steps: schedule a call, assess a sample fitting with a site survey, refurbish and test fittings off site, then deliver them ready to install with a renewed 5-year warranty.
Start a project
Send us a photo of your fittings. We'll tell you what's possible.
Book a call with a Light Engineer. Share images, location and quantities and we'll assess whether your luminaires can be retrofitted.
Enquire with 299 Lighting →